You might have seen that ethernet doesn’t have a valid IP configuration on your computer. It shows when your system doesn’t get a valid IP address from the router. And, actually, it comes from your DHCP server). It can be the modem, the switch, or the wireless router.
When you connect your system with a network connection, it will obtain details of the subnet mask, default gateway, IP address, DNS server, and more automatically. It is necessary to process your request for a webpage. However, all the requirements can’t be obtained for some reason, which causes problems because the ethernet does not have a valid IP configuration.
That is why you have to deal with some annoying errors. Sometimes, it can be a limited connection, no internet access, etc. This type of error is not permanent and can be easy to resolve. It comes from software, and you can get rid of them easily.
With that in mind, we are here to help you. Let us tell you which solutions do you need for the ethernet ip configuration error on your Windows PC.
Causes of Errors
Before starting the Ethernet, doesn’t have a valid IP configuration cause you should know about IP. Internet Protocol address offers you to communicate with the internet. Using an IP address, you can communicate with the Internet and access what you want.
However, there are many IP addresses such as public, private, statics, and dynamic. Moreover, there are two types of IP addresses as IPv4 and IPv6. All addresses come in this range.
However, you might face the error message “Ethernet does not have a valid IP configuration”. It means that the Ethernet connection is no longer for IP configuration and Windows OS is down. It receives the IP address from the DHCP.
This network protocol system is responsible for enabling a server to auto-assign an IP address. It uniquely assigns an IP address to your PC for a specific network. Doing so, if you are using a computer and facing an Ethernet problem, then you are not able to connect to a network.
There are lots of reasons behind this, such as faulty, outdated, incorrect network adapter drivers, and more. You can fix them by applying the methods we are going to discuss. Also, you can reinstall the driver, or update network drivers. You have to configure your network settings and try other fixes.
How to Fix Ethernet Doesn’t Have a Valid IP Configuration
Since we have told you that there are lots of reasons behind this problem. These can be
- DHCP issues
- Incorrect configuration in the Network Adapter
- Faulty network driver
- Expired cached files
- Cable Issues
No matter what type of issue you are facing, here we have solutions for all. However, before proceeding, we recommend you restart your Windows PC. Sometimes, rebooting can help you to eliminate most of the issues. After that, you need to follow these steps:
– Reset TCP/IP Settings and Winsock Protocol
The first thing that you need to do is to Reset TCP/IP Settings and Winsock Protocol. This process helps most Windows errors to get rid of the Internet connection, DNS, or IP. So you have to press WINDOWS+X and then select the Command Prompt option from the pop-up menu.
After that, you have to perform this command to reset the Winsock protocol on your Windows computer. When reset has been done, you have to execute these commands to reset the TCP/IP settings:
- netshinttcp reset
- netshintip reset
When you have done it, reboot your system, and that’s all.
Still, if you are facing any issues, then you can follow the following method.
– Clear all the Cached Files
Sometimes cache files take storage and cause invalid IP configuration. If the issue does not resolve, then you have to clean up all the network cached files on your PC. For this purpose, you need to follow these steps. You have to open the command prompt to process the following commands.
- Ipconfig /release
- ipconfig /flushdns
- ipconfig /renew
When you have done these commands, then restart your system. Then you have to connect to the internet or check if your device is working or not. If it is not working, then you have to follow the following step.
– Manually Configure TCP/IP Settings
After completing the above two steps, you need to follow this step to resolve Ethernet’s no valid IP configuration. To do so, you need to follow these steps:
- First of all, you have to right-click on the Network Connection Icon on your taskbar.
- Then you need to select the Open Network and Sharing Center option.
- After that, you have to click on the Ethernet network adapter and click on the properties.
- Then you have to select the TCP/IPv4 then double click on the Internet Protocol Version 4.
- However, if you are using IPv6, then click on it.
Now you have two cases such as:
First of all, you have to configure the Ip address and some other details. It enables you to access the Internet, but it doesn’t or shows the Ethernet valid IP configuration message. You have to switch back to the automatic configuration method. Regarding that, you have
- Select obtain an IP address automatically.
- Then select the DNS server address automatically.
Then you can choose the second case that needs to configure those settings with the static details. It brings a subnet mask, LAN IP address, default gateway, and DNS server. For instance:
- IP address: 192.168.1.112
- Subnet mask: 255.255.255.0
- Default gateway: 192.168.1.1
- DNS server: 188.8.131.52 and 184.108.40.206
After that, you have to remember that your IP and gateway are set to default.
IP Address: You can set any IP address but if you are using the default address, then make sure your IP must be 192.168.11.xxx. But you have to make sure that the IP address that other devices have used will lead to an IP conflict issue.
Default Gateway: It is the IP address of your modem. It depends on the DHCP server.
Lastly, you have to fill in all the needed details, and then you have to click OK. Then you have to reboot your system. Hopefully, the issue will be resolved. If you don’t, you have to follow the next step.
– Reboot Modem or Wireless Router
First of all, you have to make sure about the Ethernet cable that you are using. It would be connected to your modem or router. It is because sometimes a broken or damaged Ethernet cable leads to interruptions of your internet connection.
This can lead to errors. Thus, you have to replace your cable as soon as possible. After that, you should reboot your modem or router, and that’s all.
– Reinstall the Driver
Next up, you have to reinstall the driver. You have to resolve the Ethernet IP configuration error. It can cause the computer an issue with the driver of your Ethernet network adapter that you have to resolve.
So you should update the drivers that you need in your system. Make sure you have reinstalled the latest drivers. Due to doing this, the problem can be resolved. You have to update and reinstall the network adapter’s driver, and then you have to press Windows + X. After that, you have to choose Device Manager from the pop-up menu.
Then click on the Ethernet right and select the Update Driver Software. Then you will have to choose one from below:
- First of all, you have to browse my computer for driver software.
- Secondly, you can search for the auto-update driver software.
- You can select any one of one option from above and use then update your system’s driver.
- In the next step, you have to uninstall the driver for your network adapter.
- When it comes, you have to go to the manufacturer’s website to download the latest driver.
– Temporarily Disable Your Antivirus
Those who have installed some antivirus software can cause some issues, such as Ethernet valid IP configuration error. If you are one of Avast’s antivirus users, you have to disable it temporarily. If you don’t know how to disable the antivirus, we recommend switching to another program. On the other hand, you can uninstall it.
We hope that this guide will help all of the users that are troubling with Ethernet and don’t have a valid IP configuration. If the issue still exists, then you should contact your Internet Service Provider.
Moreover, you can contact us, and we are here 24/7 to help you. You can share your problem in the comment section, and we will answer you as soon as possible. It would be the most effective solution.
– Run Windows Network Diagnostic Tool
It is also a simple solution that you need to follow. Most of the time, the Ethernet adapter might be using false configurations to establish a connection with your network through ISP via Ethernet cable. In this case, you will get a message that Ethernet doesn’t have valid IP configuration. To fix this issue, you have to follow these steps:
- First of all, you have to press Windows + R to open the Command Prompt
- Then you have o give command of ncpa.cpl and enter
- Click on the right on the Ethernet adapter and Diagnose. That’s all!
The Bottom Line
All in all, we have provided you with all solutions for Ethernet that don’t have a valid IP configuration. It appears when your Windows computer did not get a valid IP address from your DHCP server.
The device can be switched, wireless router, or modem. It is a fact that by default, a network connection can access the details, including the default gateway, subnet mask, DNS server, and more.
But there are some reasons that can cause the Ethernet IP configuration problem. Which is a result you will lose connection to the internet. With that in mind, we helped you by providing simple solutions. Besides that, if you have any questions, then you can comment below. We are always here to help you. Thank you!